#ifndef CONFIG_GENERAL_H #define CONFIG_GENERAL_H /** @file * * General configuration * */ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); #include /* * Banner timeout configuration * * This controls the timeout for the "Press Ctrl-B for the iPXE * command line" banner displayed when iPXE starts up. The value is * specified in tenths of a second for which the banner should appear. * A value of 0 disables the banner. * * ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE" * banner displayed only by ROM builds of iPXE during POST. This * defaults to being twice the length of BANNER_TIMEOUT, to allow for * BIOSes that switch video modes immediately before calling the * initialisation vector, thus rendering the banner almost invisible * to the user. */ #define BANNER_TIMEOUT 20 #define ROM_BANNER_TIMEOUT ( 2 * BANNER_TIMEOUT ) /* * Network protocols * */ #define NET_PROTO_IPV4 /* IPv4 protocol */ #undef NET_PROTO_IPV6 /* IPv6 protocol */ #undef NET_PROTO_FCOE /* Fibre Channel over Ethernet protocol */ #define NET_PROTO_STP /* Spanning Tree protocol */ #define NET_PROTO_LACP /* Link Aggregation control protocol */ /* * PXE support * */ //#undef PXE_STACK /* PXE stack in iPXE - you want this! */ //#undef PXE_MENU /* PXE menu booting */ /* * Download protocols * */ #define DOWNLOAD_PROTO_TFTP /* Trivial File Transfer Protocol */ #define DOWNLOAD_PROTO_HTTP /* Hypertext Transfer Protocol */ #undef DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */ #undef DOWNLOAD_PROTO_FTP /* File Transfer Protocol */ #undef DOWNLOAD_PROTO_SLAM /* Scalable Local Area Multicast */ #undef DOWNLOAD_PROTO_NFS /* Network File System Protocol */ //#undef DOWNLOAD_PROTO_FILE /* Local filesystem access */ /* * SAN boot protocols * */ //#undef SANBOOT_PROTO_ISCSI /* iSCSI protocol */ //#undef SANBOOT_PROTO_AOE /* AoE protocol */ //#undef SANBOOT_PROTO_IB_SRP /* Infiniband SCSI RDMA protocol */ //#undef SANBOOT_PROTO_FCP /* Fibre Channel protocol */ //#undef SANBOOT_PROTO_HTTP /* HTTP SAN protocol */ /* * HTTP extensions * */ #define HTTP_AUTH_BASIC /* Basic authentication */ #define HTTP_AUTH_DIGEST /* Digest authentication */ //#define HTTP_ENC_PEERDIST /* PeerDist content encoding */ /* * 802.11 cryptosystems and handshaking protocols * */ #define CRYPTO_80211_WEP /* WEP encryption (deprecated and insecure!) */ #define CRYPTO_80211_WPA /* WPA Personal, authenticating with passphrase */ #define CRYPTO_80211_WPA2 /* Add support for stronger WPA cryptography */ /* * Name resolution modules * */ #define DNS_RESOLVER /* DNS resolver */ /* * Image types * * Etherboot supports various image formats. Select whichever ones * you want to use. * */ //#define IMAGE_NBI /* NBI image support */ //#define IMAGE_ELF /* ELF image support */ //#define IMAGE_MULTIBOOT /* MultiBoot image support */ //#define IMAGE_PXE /* PXE image support */ //#define IMAGE_SCRIPT /* iPXE script image support */ //#define IMAGE_BZIMAGE /* Linux bzImage image support */ //#define IMAGE_COMBOOT /* SYSLINUX COMBOOT image support */ //#define IMAGE_EFI /* EFI image support */ //#define IMAGE_SDI /* SDI image support */ //#define IMAGE_PNM /* PNM image support */ #define IMAGE_PNG /* PNG image support */ #define IMAGE_DER /* DER image support */ #define IMAGE_PEM /* PEM image support */ /* * Command-line commands to include * */ #define AUTOBOOT_CMD /* Automatic booting */ #define NVO_CMD /* Non-volatile option storage commands */ #define CONFIG_CMD /* Option configuration console */ #define IFMGMT_CMD /* Interface management commands */ #define IWMGMT_CMD /* Wireless interface management commands */ #define IBMGMT_CMD /* Infiniband management commands */ #define FCMGMT_CMD /* Fibre Channel management commands */ #define ROUTE_CMD /* Routing table management commands */ #define IMAGE_CMD /* Image management commands */ #define DHCP_CMD /* DHCP management commands */ #define SANBOOT_CMD /* SAN boot commands */ #define MENU_CMD /* Menu commands */ #define LOGIN_CMD /* Login command */ #define SYNC_CMD /* Sync command */ //#define NSLOOKUP_CMD /* DNS resolving command */ //#define TIME_CMD /* Time commands */ //#define DIGEST_CMD /* Image crypto digest commands */ //#define LOTEST_CMD /* Loopback testing commands */ //#define VLAN_CMD /* VLAN commands */ //#define PXE_CMD /* PXE commands */ //#define REBOOT_CMD /* Reboot command */ //#define POWEROFF_CMD /* Power off command */ //#define IMAGE_TRUST_CMD /* Image trust management commands */ //#define PCI_CMD /* PCI commands */ //#define PARAM_CMD /* Form parameter commands */ //#define NEIGHBOUR_CMD /* Neighbour management commands */ //#define PING_CMD /* Ping command */ //#define CONSOLE_CMD /* Console command */ //#define IPSTAT_CMD /* IP statistics commands */ //#define PROFSTAT_CMD /* Profiling commands */ //#define NTP_CMD /* NTP commands */ //#define CERT_CMD /* Certificate management commands */ /* * ROM-specific options * */ #undef NONPNP_HOOK_INT19 /* Hook INT19 on non-PnP BIOSes */ #define AUTOBOOT_ROM_FILTER /* Autoboot only devices matching our ROM */ /* * Virtual network devices * */ #define VNIC_IPOIB /* Infiniband IPoIB virtual NICs */ //#define VNIC_XSIGO /* Infiniband Xsigo virtual NICs */ /* * Error message tables to include * */ #undef ERRMSG_80211 /* All 802.11 error descriptions (~3.3kb) */ /* * Obscure configuration options * * You probably don't need to touch these. * */ #undef BUILD_SERIAL /* Include an automatic build serial * number. Add "bs" to the list of * make targets. For example: * "make bin/rtl8139.dsk bs" */ #undef BUILD_ID /* Include a custom build ID string, * e.g "test-foo" */ #undef NULL_TRAP /* Attempt to catch NULL function calls */ #undef GDBSERIAL /* Remote GDB debugging over serial */ #undef GDBUDP /* Remote GDB debugging over UDP * (both may be set) */ //#define EFI_DOWNGRADE_UX /* Downgrade UEFI user experience */ #define TIVOLI_VMM_WORKAROUND /* Work around the Tivoli VMM's garbling of SSE * registers when iPXE traps to it due to * privileged instructions */ #include #include NAMED_CONFIG(general.h) #include #include LOCAL_NAMED_CONFIG(general.h) #endif /* CONFIG_GENERAL_H */